Fabrication, coating and pressure testing of Aerogas Fuel Tankers
Over the past thirty (30) years, we have forged fruitful business relations with some of the most renowned companies and organizations in the region.
Miscellaneous fabricating and welding services on furnace.
Ladders Fabrication and welding of access ladders on towers.
Underwater inspection and cleaning of FW Pump Suction Strainers at SP3 & SP4
Fabricate and install catwalk for South Pump & Inlet Filter at NP Piarco
Fabricate, weld, coat and install stairway at ISCOTT Dock
Fabricate, Weld and coat internally and externally 380ft 6” pipe to send at NP Dominica
Fabricate, weld, coat and install 263ft 16” piping at Pointe-a-Pierre
Washing and cleaning of roadways around gantry and plant area at NP compound on a monthly basis
Cleaning of Interceptor pits at bund area and NP compound on a monthly basis
Supply of marine fitter at dock 1 & dock 2 and to supply additional manpower as requested by PPGPL to facilitate opening and closing of
Performing of Janitorial works (Dusting, sweeping, Mopping etc.) and Grass Maintenance of Switch Houses, Sub Stations, Transformer Enclosures, Generator Cages and Switch Enclosures in Conversion
Renewal of ft of 16” piping before it can be put into service inclusive of pipe supports, weld build up, excavations of test holes, renewal
Weed Cutting, cleaning and clearing of all garbage and unwanted material from inside and around Transformer Enclosures, Air Brake Switches & Towers, Substations, Bulk Power
Manually excavate and locate leak and clamp 30: VGO Suction Line
Renewal of approximately 80ft of 4” Hydrant Line
Carrying out emergent plant fitting works for start up of SRU Plant inclusive of removal of sulphur locks, Mudlegs, Blanking of nozzles and run down
Maintenance works associated with 4VDU, inclusive of isolating piping, scaffolding, renewing piping of various sizes (3”, 4” 150ft, 6”, 8”, 10” 1100ft) and types (Air,
Includes Fabricating, Welding, Pipefitting and Miscellaneous works as required by Petrotrin
Miscellaneous repair works on offsite process piping(2”, 3”, 4”, 8”, 12” & 16”) associated with SRU Plant
Cleaning and Clearing of Sulphur Fine and slush in the Foaming Tank at Prilling Plant
Manually and mechanical excavation of roadway to locate leak also to clear under all piping spools and flanges of diameter 30”, 24”, 20”, 14”, 8”,
Miscellaneous Repair Works on offsite piping of 2” 3” 4” 6” & 8” associated with Hydrogen Plant at Petrotrin REFINERY Pointe a Pierre
Installation of piping and associated works(e.g. foundation works) for 2 New Gasoline Transfer Pumps at No. 3 Pumphouse
Paving of access road 3600 square yards to the muster point also Installation of Directional Signs and Muster Point Signs
Replacement of piping 4”, 6”, 8”, 10” and 16”, Civil works around tank and the Repairs and Painting of TANK 15 which has a diameter
Fabricating, Welding and Pipefitting services done on various sizes and lengths of piping.
Renew approximately 360ft of 36inch Diameter filling line for Tank 103 to include 2 36” welded expansion joints, 2 24” spools, access platform to s/line
Replacement of piping 4” 400ft, 6” 320ft and 8” 200ft, Civil works around tank and the Repairs and Painting of TANK 4 which has a
Install temporary Steam lines to Vacuum column, Welding of brackets for electrical fixtures and conduits on salt water condenser structure and wash oil reduced crude
Renew 1-off section of 16” diameter pipework approximately 10ft long.
I solating, pulling of bundle for shop repairs, re-installation, testing and de-isolation of North Circulating SteaM Generator
Removal and Transportation of occupants possessions from #7 Endridge
Miscellaneous repair works on offsite pipe works (1.5”, 3”, 4”, 6”, 20” & 24” diameter pipe) related to No. 2 Unifiner
Rerouting of the 10” Diameter Gas Oil Filling and 3” diameter Air Supply Line to Tank 65 located in West Area 1 Guaging Tank Farm
Fabricate and Install approximately 400ft of 2” and 1 1/2” new raw water piping to Candy Plant located at the Easter Water Treatment Plant.
Repairs to 1 ½” tie in to P-5509 Discharge & 4” Line from pump check valve to bypass loop.
Cut out 4” 300# flange and replace with 4” 600# flange.
Fabrication of new section of defective 6” diameter Base Stock Line.
Fabricate, weld, radiograph, hydro test and install approximately 60ft of 3” and 4” Section of cooling water return line at Isom Plant
Fabricate and weld to renew 4” and 6” Steam Jacketed Line from pump to distribution tray.
Renewal of sections of piping encompassing TMLs 4, 13, 15, and 16 on the discharge line.
Renewal of sections of 10”, 8” and 6” diameter HVGO Outlet piping to vacuum tower.
Modification of 65# Steam Header Ex. Battery Limit on Isom 1.
Cut out corroded leaking section of tail gas inlet on external of incinerator and fabricate and install insert patches and weld off.
Remove and reinstall new Ammonia Manifold and associated piping inclusive of stress relieve, hydro test, grit blasting and coating.
Modify flare line on condenser structure, weld build up on 8” elbow and installation of 8” line.
Renew sections of piping and spool on 2” Naphtha Line Kero Stripper Pump.
Fabricate, x-ray, hydro test and install 1” seal flush also modify existing, fabricate and install new supports for smother steam piping.
Renewal of Smother Steam Piping associated with HVGO Pumps, LVGO Pumps and Vacuum Resid Pumps.
Remove bundles, Install (2-off) Slip Blinds, Transport Bundles to tube bundle shopand fabricate and weld by-pass spools.
Installation of Temporary 175psi Smother Steam Rings at C-7501 Fractionator inclusive of fabricating and welding of 340ft of 4” Smother Steam Supply Line, 520ft of
Isolation and de-isolation of Coalsescer for Inspection and repairs.
Miscellaneous repair works on various piping for 2VBU.
Renew 1160ft of various sizes of pipework (8”, 6”, 4”) for 5TA for re-commissioning
Fabricate, weld, radiograph, stress relieve, test and install approximately 600ft of 2” pipework.
Repair 630ft of various piping (8”, 6”) above and underground and miscellaneous works inclusive of wrapping line etc.
Repair works of approximately 870ft of various size piping (3”, 6”, 10”) and other works at 4VDU